The NuFACE Trinity Facial Trainer is an FDA-cleared microcurrent treatment attachment for the NuFACE Trinity. This video will show you the five-minute basic treatment for both the NuFACE Trinity and NuFACE mini.
Before you begin, charge the NuFACE Trinity Device for a full 12 hours or 16 hours for the NuFACE mini.
Step 1: Prep
Cleanse the skin with an oil-free cleanser, removing any makeup, oils and impurities and apply the NuFACE Gel Primer to the left cheek area. Apply the gel in a mask-like layer so that the skin appears wet. Press the on/off button to power device on. Press the intensity control button until you reach the maximum level. Intensity can be adjusted for comfort at any time.
Step 2: Lift
Place both spheres on position one and glide to the lower ear until the beep sounds. You will hear the audible treatment timer beep every five seconds. Move to position two and glide. Move to position three and glide. Return to position one and repeat the sequence two more times.
Apply the gel primer above the left brow. Place both spheres on position one and slowly glide toward your hairline until the beep sounds. Move to position two and glide. Move to position three and glide. Return to position one and repeat the sequence two more times.
Compare the treated side of the face to the untreated side and look for improvement in the brow, cheekbone and jawline areas. Now apply the Gel Primer to the other side of the face and continue the treatment.
Step 3: Finish
Power off the device and place on the charging cradle after every treatment. Remove the Gel Primer with a damp cloth and apply your favorite NuFACE serum or continue with your normal skin care routine.
Use five minutes a day five times a week for the first 60 days. After 60 days, use two to three times a week to maintain the results.
|Mon-Thur||9 - 6 p.m. CT|
|Fri||9 - 5 p.m. CT|
|Sat||9 - 3 p.m. CT|
|Sun / Holidays||Closed|